Your Hero X Pulse 200T is designed to run on 100/80-17 front and 130/70 R17 rear tyre sizes for consistent on-road performance. Our Eurogrip tyre for Hero X Pulse 200T offers front and rear options engineered for stable handling and confident grip. Check out the Hero X Pulse 200T tyre price before selecting the right Hero X Pulse 200T tyre to match your riding requirements.
Variant | Front Tyre Size | Rear Tyre Size | Load Index / Speed Rating |
Hero XPulse 200T 4V STD | 100/80-17 | 130/70 R17 | 52P Front / 62P Rear |
Hero XPulse 200T 2V STD | 100/80-17 | 52P Front / 62P Rear | |
Hero XPulse 200T 2V BS-VI | 100/80-17 | 130/70 R17 | 52P Front / 62P Rear |
Tube Type | Suitable for | Benefits |
Tubeless (TL) | Hero XPulse 200T 4V STD, Hero XPulse 200T 2V STD, and Hero XPulse 200T 2V BS-VI with alloy wheels. | Better puncture management, reduced heat generation, lower weight and no inner tube required. |
Warranty | Duration |
Manufacturing Defects | 7 years from the date of manufacture* |
Non-Manufacturing Defects | 3 years from the date of manufacture* |
*Subject to applicable tread wear conditions and warranty terms.
The recommended Hero X Pulse 200T tyre size is 100/80-17 for the front and 130/70 R17 for the rear. These dimensions are specified to support the motorcycle's intended handling, braking response, and stability. Using the prescribed tyre sizes also helps maintain balanced road contact and consistent riding performance.
The Hero X Pulse 200T tyre price generally ranges from ₹2,000 to ₹4,000, depending on the tyre model, construction, and intended application. Front and rear tyres are priced separately, so the total replacement cost varies according to the tyre combination installed on the motorcycle.
Yes. The Hero X Pulse 200T is fitted with a 130/70 R17 rear tyre, which is available in radial construction. A radial rear tyre offers improved heat management, enhanced high-speed stability, and consistent contact with the road, making it suitable for varied riding conditions and longer distances.
The recommended Hero X Pulse 200T tyre pressure is typically 29 PSI for the front and 33 PSI for the rear during solo riding. Pressure should be measured before riding, while the tyres are cold, to obtain an accurate reading and support consistent handling and tyre performance.
A Hero X Pulse 200T tyre replacement is recommended once the tread reaches the wear indicators, visible damage is present, or grip and handling noticeably decline. Many motorcycle tyres require replacement between 25,000 and 40,000 km, depending on riding conditions, maintenance, and tyre usage.
The valve stem should be free from cracks, hardening, cuts, or air leakage before a new Hero X Pulse 200T tyre is fitted. Replacing a worn valve during tyre installation helps maintain proper inflation pressure and reduces the possibility of gradual air loss during operation.
Wheel balancing is recommended after installing a Hero X Pulse 200T tyre because it distributes wheel weight evenly. Proper balancing reduces vibration, supports smoother steering, minimises uneven tread wear, and contributes to stable performance across different riding speeds.
A new Hero X Pulse 200T tyre typically requires a running-in distance of 100 to 200 km. During this period, gradual acceleration, moderate braking, and controlled cornering allow the tread surface to adapt to road conditions and deliver consistent grip.
Uneven tread wear can indicate incorrect Hero X Pulse 200T tyre pressure. Excessive centre wear may result from overinflation, while shoulder wear often points to insufficient pressure. Monitoring tread condition and maintaining the recommended PSI helps support balanced wear and stable motorcycle handling.
Before fitting a Hero X Pulse 200T tyre, inspect the wheel rim for dents, corrosion, or bead-seat damage. The valve stem, wheel bearings, and rim surfaces should also be in good condition. These inspections support proper tyre seating, air retention, and smooth on-road performance.