The Yamaha Ray ZR comes in two variants with different tyre sizes: the older 113cc model uses 90/100-10 tyres front and rear, while the 125 Fi Hybrid uses 90/90-12 front and 110/90-10 rear. Both variants run tubeless tyres on alloy wheels, engineered for city commutes and stop-start traffic across Indian roads. Eurogrip supplies OEM-quality tyres to major two-wheeler manufacturers, the same tyres factory-fitted on vehicles are available for replacement. Compare compatible Yamaha Ray ZR tyre options and prices.
| Variant | Front Tyre Size | Rear Tyre Size | Load Index / Speed Rating |
|---|---|---|---|
| Ray ZR 125cc Fi Hybrid | 90/90-12 | 110/90-10 | 54J (front) / 61J (rear) |
| Ray ZR 113cc (older models) | 90/100-10 | 90/100-10 | 53J (both ends) |
| Tyre Type | Suitable For | Benefits |
|---|---|---|
| Tubeless (TL) | All Ray ZR variants (factory-fitted on all alloy rims) | No tube pinch risk, instant puncture visibility, easier repairs, lower rolling resistance for city fuel efficiency |
| Warranty Type | Duration |
|---|---|
| Manufacturing Defects | 7 years from the date of manufacture* |
| Non-Manufacturing Defects | 3 years from the date of manufacture* |
*Subject to applicable tread wear conditions and warranty terms.
The Yamaha Ray ZR 125 Fi Hybrid uses two different tyre sizes: 90/90-12 on the front wheel and 110/90-10 on the rear wheel. Both are tubeless tyres fitted on alloy rims. The older 113cc Ray ZR model uses 90/100-10 front and rear. Check your vehicle's registration documents to confirm the exact variant.
Eurogrip Yamaha Ray ZR tyre options are available in the ₹1,300 to ₹1,800 price range, depending on the tyre model, tread design, and specifications. The final cost of a Yamaha Ray ZR tyre can vary based on the selected Eurogrip variant and prevailing dealer or retailer prices.
Recommended tyre pressure for Yamaha Ray ZR is 22 PSI for the front tyre and 36 PSI for the rear tyre. Maintain correct pressure for even tread wear and stable handling. Check pressure when tyres are cold, before riding.
Yamaha Ray ZR tyres are tubeless across both the 113cc model and the 125 Fi Hybrid variants. Tubeless tyres seal directly to the alloy rim without an inner tube, reducing puncture risk and allowing gradual air loss if the tread is pierced. This gives you time to reach a repair shop safely instead of instant deflation.
No. The front and rear tyres on the Yamaha Ray ZR 125 have different sizes and rim diameters, making them non-interchangeable. Always replace each tyre with the correct OEM-specified size to maintain handling, braking performance, and safety.
Replace Yamaha Ray ZR tyres between 25,000 and 30,000 km, depending on tread wear and riding conditions. Check tread depth indicators monthly; replace when tread reaches 1.6 mm depth. Inspect for cuts, bulges, or uneven wear patterns.
Several tyre brands manufacture 90/100-10, 90/90-12, and 110/90-10 sizes for Yamaha Ray ZR variants. Eurogrip supplies OEM-quality tyres to two-wheeler manufacturers, the same product you see factory-fitted is available for replacement. When comparing brands, verify the exact tyre size matches your Ray ZR variant, check tubeless compatibility, and confirm load index ratings for your riding conditions.
The Yamaha Ray ZR 125 uses a 54J-rated front tyre and a 61J-rated rear tyre. The 54 load index indicates a maximum load capacity of 212 kg, while the 61 load index indicates a maximum load capacity of 257 kg. The "J" speed rating signifies that the tyres are rated for speeds of up to 100 km/h.
The front tyre size 90/90-12 on Yamaha Ray ZR 125 breaks down as: 90 mm tread width, 90% aspect ratio (sidewall height is 90% of width), and 12-inch rim diameter. The aspect ratio determines sidewall stiffness; lower values give firmer handling, and higher values absorb road bumps better.
No. Yamaha Ray ZR comes with tubeless tyres fitted on alloy wheels, which lack the spoke holes and valve stem design needed for tube-type fitment. Alloy rims provide an airtight seal for tubeless tyres. Attempting to fit tube-type tyres compromises safety.